Made by a pilot for pilots, the “1st Gen” LEARJET yoke emblem for the Legacy 23, LJ24, or LJ25. Designed to the type design and manufactured in the USA by Swearingen 3D works of Marion IA.. Distributed by the designer, a former Learjet DER. Upon order, any questions are answered and manufacturing performed to assure the value I have designed for you.

The 1st Gen LEARJET “Legacy 23” emblem consist of a sculpted, PLA 3D printed facsimile of the 1960’s original yoke emblem ready for installation into the LEARJET pilots and copilots control yokes. The Color enhanced versions are slightly thicker from the type design and feature the name LEARJET in red and a slightly different font than the type design.

FEATURES

• Yoke Emblem Legacy LEARJET 23, LJ 24, or LJ 25.

  • Size: Width 2.00 in. x Height 0.65 in. x Thickness 0.14 in.

  • Weight: 2 oz.

  • Four Color layering embodies the design of the original flat printing aluminum . The Legacy 23 is duplicated in two fashions. One, the legacy version, white colored background, white numbers, black letters at a thickness of the type design. And two, the colored versions which are the same except with the enhanced addition of red lettering of LEARJET and greater in thickness.

  • Two sided 3m VHB adhesive to attach to yoke emblem perimeter

  • Encapsulation: After many months of product trials, we now provide full encapsulation of the basic emblem to provide a crystal clear encapsulation with scratch, UV and yellowing resistant urethane.

  • Terms and Conditions approval required prior to purchase.

• Non-Smoker Manufacturing Facility

Note: Installation Approval. These emblems are not manufactured under an STC and if installed in a certified aircraft will require FAA Airworthiness Inspector approval via FORM 337 or equivalent.