Made by a pilot for pilots, the “T-6 Texan” Throttle Grip with guarded PTT is manufactured in the USA by Swearingen 3D works of Marion IA., packaged in the USA and distributed by the designer. Everything you order is prepared just for you, after you order. Upon order, your configuration options are checked and incorporated, final assembly completed, and continuity checks performed to assure the value and performance I have designed for you.

The throttle grip consists of a 1.49 inch 3D printed T-6 throttle sphere, reproduced from existing OEM hardware. The throttle grip has been made compatible with the T-6 throttle lever. The push-to-talk (PTT) switch is contained within an add-on and integral switch guard on the inboard surface of the throttle ball, and is operated by the pad of the left-hand thumb.

The Throttle Grip is available in three configurations to choose from. 1. The T-6 Sphere with switch guarded PTT, in gloss silver, gloss black or military flat black. Configuration 1 comes complete with a functionally tested PTT switch. or; 2. The standard T-6 Sphere only, in gloss silver, gloss black or military flat black This is a throttle grip that provides a remove and replace option to your existing T-6 ball and switch.

FEATURES

• T-6 Throttle Ball Size: 1.49in. (37.9mm) Diameter

• Compatible with T-6 0.58 Inch x 0.125 Inch width throttle levers. The throttle ball internals are manufactured to conform the the OEM lever circular end, while yet allowing enough working area for wiring connections.

• Weight: 20.8g, a 30.8% weight savings from the OEM aluminum ball.

• The "T-6 Texan" throttle sphere is made from tough ecologically friendly, 3D printer Metallic Silver PLA or as an option, inclusive of switch guard, finished in Gloss Black or Black Military Flat.

•  Throttle Ball contains a push-to-talk (PTT) switch, rated as follows:

        Voltage Rating: 12Vdc

           Current Rating: 5A

       Switch Type: SPST - NO,  Off-(MOM)On

          Tested Life: 10,000 cycles

           Temperature Rating: -20C to 80C  

 PTT cover comes standard in red.

PTT switch is mounted within the Throttle ball by a black surround and functionally tested.

• Condition: New

• Terms and Conditions approval required prior to purchase

• Non-Smoker Manufacturing Facility

• This sale is for the throttle grip and PTT only and is not sold with the throttle quadrant (as shown in pictures).

If you have any questions about this product, please ask.