Made by a pilot for pilots, the LEARJET 35 yoke emblem. Designed to the type design and manufactured in the USA by Swearingen 3D works of Marion IA.. Distributed by the designer, a former Learjet DER. Upon order, any questions are answered and manufacturing performed to assure the value I have designed for you.

The LEARJET “Type Design 35” emblem consists of a sculpted, PLA 3D printed facsimile of the original 1973 original yoke emblem ready for installation into the LEARJET pilots and copilots control yokes. There were at a minimum, four additional LEARJET 35 configurations out through 1994, one being the -2 configuration also featured within this web release.

FEATURES

• Yoke Emblem Legacy LEARJET 35, and -2 LEARJET 35

  • Size: Width 2.55 in. x Height 3.5 in. x Thickness 0.14 in.

  • Weight: 2 oz.

  • Four Color layering embodies the design of the original flat printing aluminum. The “Type Design 35” duplicates the type design with a white background layered with a shadowed, light blue 35 with silver letters and logo. The -2 LR35 has the dark blue logo, and letters on a white background.

  • Encapsulation: After many months of product trials, we now provide full encapsulation of the basic emblem to provide a crystal clear encapsulation with scratch, UV and yellowing resistant urethane.

  • Terms and Conditions approval required prior to purchase.

• Non-Smoker Manufacturing Facility

Note: Installation Approval. These emblems are not manufactured under an STC and as installed in a certified aircraft will require FAA Airworthiness Inspector approval via FORM 337 or equivalent.